Customization: | Available |
---|---|
Media: | Water/Oil/Drug/Drink/Cosmetic |
Driving Mode: | Handle/Pneumatic/Electric |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Standard | 3A,SMS,DIN,ISO,RJT,IDF | |
Product wetted steel parts | AISI304/AISI316L | Provided with material inspection report |
Other steel parts | AISI304 | |
Size | 1/2"~6",DN10~DN150 | |
Seal material | EPDM/VMQ/FPM | All seals material comply with FDA21CFR117.2600 |
Working pressure | ≤10bar(145psi) | |
Supply pressure for air actuator | 5~8(0~116psi) | |
Working temperature | EPDM:-14~248ºF(-10~120ºC) | |
VMQ:-58~356ºF(-50~180ºC) | ||
FPM:22~446ºF(-30~230ºC) | ||
Other materials are avaible upon request | ||
Sterilization temperature | 302ºF(150ºC,max 20min) | |
Outside surface treatment | Ra16~32uin(o.4~0.8um) | |
Inside surface treatment | Ra32~64uin(o.8~1.6um) | |
Connetion ends | butt-weld,clamped ends,male ends, flange ends | |
Pneumatic head | Normally closed(NC)-Air to open,spring to close | |
Normally open(NO)-Air to close,spring to open | ||
Air to air(AA)-Air to open,air to close |
Options:
1.The seat and gasket can be NBR (Nitrile) orVMQ (Silicone) all complying with FDA 21CFR177.2600.
2. End connection can be butt-welded, sanitary clamp, threaded, flanged, I-line or others upon request.
3.Handle: 3-position pull handle; multi-position handle in either pure stainless steel or with plastic cover.
4.Actuator: pneumatic stainless steel actuator (vertical type), pneumatic aluminum actuator (horizontal type), electric actuator.
5.Control: position sensor, C-top controller, C-top controller (AS-I)
Design Features:
1.Various standards can be provided: DIN, 3A, SMS, ISO / IDF, BS / RJT, and ASME / BPE.
2.Available in sizes from DN25 / 1" to DN300 / 12"
3.Multiposition handles can be used for valves up to DN100 / 4";
4.Pull handles can be used for valves from DN25 / 1" to DN300 / 12"
Manual handle,
5.pneumatic actuator and electric actuator are interchangeable.
6.Seals comply with FDA 21CFR 177. 2600.
7.The valve body can be customized with a wide selection of different connections.
Butterfly valves can be actuated either manually or pneumatically. There is a wide range of manual controls to meet the different system requirements. Pneumatic controls can be horizontal and vertical, single-, double-effect, and modulating. They can be fitted with control tops and proximity It is widely applied to many fileds,such as beer,beverage,dairy food,fruit juice,pharmacy,biological etc.
Technical Parameter:
Standard | ISO, 3A, DIN, SMS, IDF, RJT |
Flow Medium Parts | 304, 304L, 316,316L |
Port Size | 3/4"~6",DN20~DN150,19mm~152.4mm |
Way of Connection | Weld, Thread, Clamp, Flange |
Gasket for butterfly valve | Silicone, EPDM, NBR |
Application | It is widely applied to many fileds, such as beer, beverage, dairy food, fruit juice, pharmacy, biological etc |
Working principle | Remote-controlled operation by the driving gear or manual operation by handle. |
Three drive forms | Normally closed, normally opened and opened and closed by two air flues seperately. |
Handle | Metal handle, reinforced nylon handle |
Adjustable handle, built to order according to users' request. | |
Advantage | 1. Sanitary condition passed FDA Certification |
2. With strong resistance to acid, alkali and high temperature | |
3. Slight deformation under long-term compression presicion forging valve cartridge. Withstand voltages | |
4. Appearance desigh: Keep pace with international latest designs | |
5. Service life: Comparable to imported butterfly valve, with 18months warrenty for normal use |